Loading the content... Loading depends on your connection speed!

Tampa, FL (813) 600-5592
Shopping Cart - $ 0.00

Our DIY Gas Fire Pit Kits (All are Nat Gas or LP Compatible)

Kits We Offer and Custom Options Available 

 Universal CK BASIC KITDELUXE Universal Kit-NoBurner_ITCK-Plus-NoBurnerPRE-PLUMBED Universal KPlusPlus KitDK-UniversalKit

 

Universal COMPLETE BASIC _CK Propane/ LP Kit

Universal CK BASIC KIT

Control it from an easily accessible and nearby tank. Best to be out and visible. More for larger fires, and without many safety features (ie convert a wood fire pit to gas for larger fires, fire in the woods for keeping warm). *** NOTE If someone spins the adjustable red knob, fire can go from small to 3-6 ft high flames with most of our burners on this kit.

BASIC LP KIT (CK) Kit: Kit Includes/ Options

  1.  20PSI Adjustable LP Regulator U.S./ Canadian Standard 
    • OPTIONS – Choose Different Pressure or Style Regulator 
  2. 12 Foot  Thermoplastic / Rubber Hi-Pressure Flexible Gas Hose (3/8 Brass Female Flare Ends )
    • OPTIONS – Choose Different Length or Material Hose
  3. PHA12F-90 Brass Fitting – Converts 1/2″ Thread from Mounting Kit to Hose Flare
    • OPTIONS – Choose Different Size Flare, Angled, or Straight Fittings
  4.  FRMK – Fire Burner Mounting Kit 4″ Fully Threaded Nipple & (2) 2.5″ Threaded Washers – Burner Can be Adjusted Up or Down 3″
    • OPTIONS – Extend Mounting Shaft Additional 4″ by adding another Nipple (NIP4) and A Coupling (PHA12FF) – gives up to 6-7″ Up/ Down Flexibility on burner mounting.

 

 

Universal COMPLETE DELUXE _CK+ Propane/ LP Kit

DELUXE Universal Kit-NoBurner

A tank can be anywhere; visible or not, 50′ away, locked up… and the ON/ OFF and Flame Intensity is controlled via a Key Valve at or very near the pit. Kit comes with standard 12′ and 3′ hi-pressure gas hoses which can be interchanged according to installation. Regulator would be left almost full on, tank can be throttled down at the main valve to achieve a “highest” setting for the key valve, which can only be adjusted via the key.

DELUXE LP KIT (CK+) Kit: Kit Includes/ Options

  1.  20PSI Adjustable LP Regulator U.S./ Canadian Standard 
    • OPTIONS – Choose Different Pressure or Style Regulator 
  2. 3 & 12 Foot  Thermoplastic / Rubber Hi-Pressure Flexible Gas Hoses (3/8 Brass Female Flare Ends )
    • OPTIONS – Choose Different Length or Material Hose
  3. PHA12F-90 & (2) PHA12M Brass Fittings –  (PHA12F-90 Converts 1/2″ Thread from Mounting Kit to Hose Flare & PHA12M Convert Key Valve to 3/8 Hose Flare )
    • OPTIONS – Choose Different Size Flare, Angled, or Straight Fittings
  4.  1/2″ Key Valve, 3″ Key and Cover Plate
    • OPTIONS – Choose Straight/ Angled or 3/4 Valve, Different Color Cover Plate & Key Lengths, Shaft Extension Fitting
  5.  FRMK – Fire Burner Mounting Kit 4″ Fully Threaded Nipple & (2) 2.5″ Threaded Washers – Burner Can be Adjusted Up or Down 3″
    • OPTIONS – Extend Mounting Shaft Additional 4″ by adding another Nipple (NIP4) and A Coupling (PHA12FF) – gives up to 6-7″ Up/ Down Flexibility on burner mounting.

 

 

Universal TANK-IN-TABLE Complete Deluxe _ITCK+ Propane/ LP Kit

_ITCK-Plus-NoBurner

A new special kit where the tank is located within the fire feature, or extremely close (like in a wine barrel fire pit/ table or Fire Bowl Pedestal). The fire feature usually sits on the tank (within the feature) and ON/ OFF and Flame Intensity is controlled via a Key Valve also installed into the feature. Kit comes with high pressure LP regulator, (2) 3′ hi-pressure gas hoses, key valve, key and cover plate, burner, mounting kit and all necessary fittings. Regulator would be left almost full on, tank can be throttled down at the main valve to achieve a “highest” setting for the key valve, which can only be adjusted via the key.

 

DELUXE LP KIT (ITCK+) Kit: Kit Includes/ Options

  1.  20PSI Adjustable LP Regulator U.S./ Canadian Standard 
    • OPTIONS – Choose Different Pressure or Style Regulator 
  2. (2) 3 Foot  Thermoplastic / Rubber Hi-Pressure Flexible Gas Hoses (3/8 Brass Female Flare Ends )
    • OPTIONS – Choose Different Length or Material Hose
  3. PHA12F-90 & (2) PHA12M Brass Fittings –  (PHA12F-90 Converts 1/2″ Thread from Mounting Kit to Hose Flare & PHA12M Convert Key Valve to 3/8 Hose Flare )
    • OPTIONS – Choose Different Size Flare, Angled, or Straight Fittings
  4.  1/2″ Key Valve, 3″ Key and Cover Plate
    • OPTIONS – Choose Straight/ Angled or 3/4 Valve, Different Color Cover Plate & Key Lengths, Shaft Extension Fitting
  5.  FRMK – Fire Burner Mounting Kit 4″ Fully Threaded Nipple & (2) 2.5″ Threaded Washers – Burner Can be Adjusted Up or Down 3″
    • OPTIONS – Extend Mounting Shaft Additional 4″ by adding another Nipple (NIP4) and A Coupling (PHA12FF) – gives up to 6-7″ Up/ Down Flexibility on burner mounting.

 

 

Universal Deluxe PRE-PLUMBED _K++ GAS Kit (Nat Gas AND Propane/ LP Compatible with no orifices necessary).

PRE-PLUMBED Universale KPlusPlus Kit copy

Our K++ kits connect to the supply with 1/2″ female adapters, a 3′ hose to the Key Valve, a 3′ hose to the burner and mounting kit, and all the fittings in between. The Key Valve also comes with a decorative cover plate and 3″ long key.

DELUXE Pre-Plumbed GAS (K++) Kit (compatible with NG and LP): Kit Includes/ Options

  1. PHA12F Brass Fitting – Converts 1/2″ Male Gas Supply Pipe to 3/8 Flare Hose
    • OPTIONS – Choose Different Supply Fitting 
  2. (2) 3 Foot  Thermoplastic / Rubber Hi-Pressure Flexible Gas Hoses (3/8 Brass Female Flare Ends )
    • OPTIONS – Choose Different Length or Material Hose
  3. PHA12F-90 & (2) PHA12M Brass Fittings –  (PHA12F-90 Converts Mounting Kits 1/2″ Thread to Hose Flare & PHA12M Convert Key Valve to 3/8 Hose Flare )
    • OPTIONS – Choose Different Size Flare, Angled, or Straight Fittings
  4.  1/2″ Key Valve, 3″ Key and Cover Plate
    • OPTIONS – Choose Straight/ Angled or 3/4 Valve, Different Color Cover Plate & Key Lengths, Shaft Extension Fitting
  5.  FRMK – Fire Burner Mounting Kit 4″ Fully Threaded Nipple & (2) 2.5″ Threaded Washers – Burner Can be Adjusted Up or Down 3″
    • OPTIONS – Extend Mounting Shaft Additional 4″ by adding another Nipple (NIP4) and A Coupling (PHA12FF) – gives up to 6-7″ Up/ Down Flexibility on burner mounting.

 

REGULATOR Substitution:

If Deluxe Kit – Choose Regulator in Kit  
Model #:
REG5F+ 5 PSI Fixed w/ POL/ Fittings (up to 2′ flames best for higher Fire Tables)
REG20F+ 20 PSI Fixed w/ POL/ Fittings (up to 5′ high flames; best for Fire Pits
REG20F+(Elbow) 20 PSI Fixed w/ POL/ Fittings (best when space is tight; up to 5′ high flames; best for fire pits)
REGO1 20 PSI Fixed (overseas)
REGO2 20 PSI Fixed (overseas)
REGA+ 20 PSI Adjustable w/ POL/ Fittings (not great for low steady flames; best for basic kits only)
REGDT3+ 3 Way Disposable LP Tank / Fittings
REG3001-ACME Low Pressure w/ Green Acme / Fittings
REG3001-POL Low Pressure w/ POL / Fittings
REG2XL+ 2 Tank Manual Switchover Regulator & Lines (best for bigger burners)
REGDTA+ Disposable LP Tank Adjustable to Hose 3/8 Fittings (for small 1 lb camping tanks)

 

HOSES Substitutions/ Upgrades:

NOW AVAILABLE (PRO Upgrades) : If you ordered one of our CK, CK+, ITCK+ or K++ Kits which come with Flexible Thermoplastic/ Rubber Hoses, by clicking the links below you can swap and pay just the difference to Upgrade to STAINLESS Professional Installer Choice Hoses w/ Brass Female Flared Ends.

_PRO Upgrade (CK) Swaps 12′ Thermoplastic Hose to PRO 12′ Stainless Hose w/ 3/8 Brass Female Flared Ends

_PRO Upgrade (CK+) Swaps Both 3′ & 12′ Thermoplastic Hoses to PRO Stainless Hoses w/ 3/8 Brass Female Flared Ends

_PRO Upgrade (ITCK+/K++) Swaps Both 3′ Thermoplastic Hoses to PRO Stainless Hoses w/ 3/8 Brass Female Flared Ends

NEW!! NEED TO CHANGE HOSE SIZES IN A KIT YOU ARE ORDERING?? Now You Can!  Once you put your Kit type in your cart, just click on one of these adjustments below, it will open a new tab, ADD THAT OPTION TO YOUR CART, close that tab, and It Will Adjust Your Order: ALSO NOW AVAILABLE – All new CUSTOM Stainless 3/8 ID Hoses with Brass Female Flared Ends for the Professional / Permitted Applications that can be exchanged for our normal rubber hoses.

HOSE EXCHANGED FROM KIT HOSES OFFERED –  
Model #: Old to New Size Needed
HE12-2-3 12′ to 3′ Now
HE12-2-6 12′ to 6′ Now
HE12-2-20 12′ to 20′ Now
HE12-2-25 12′ to 25′ Now
HE12-2-35 12′ to 35′ Now
HE12-2-50 12′ to 50′ Now
HE3-2-6 3′ to 6′ Now
HE3-2-12 3′ to 12′ Now
HE3-2-20 3′ to 20′ Now
HE3-2-25 3′ to 25′ Now
HE3-2-35 3′ to 35′ Now
HE3-2-50 3′ to 50′ Now
HE3-2-1SS38 3′ Plastic to 1′ Pro Stainless Hose Now
HE3-2-3SS38 3′ Plastic to 3′ Pro Stainless Hose Now
HE3-2-12SS38 3′ Plastic to 12′ Pro Stainless Hose Now
HE12-2-3SS38 12′ Plastic to 3′ Pro Stainless Hose Now
HE12-2-12SS38 12′ Plastic to 12′ Pro Stainless Hose Now

 

KEY VALVES/ COVER COLOR/ FITTINGS Substitutions/ Upgrades:

 

OPTIONS  DESCRIPTION of CHANGE PIC KIT
Chrome Cover Color  Key and Cover Plate color choice KV-C  Deluxe
Brass Cover Color Key and Cover Plate color (default) KV-B  Deluxe
Angled Key Valve
not Straight Through KV-A-FITTING-2  Deluxe
Straight Key Valve not Angled – (default – Common) KV-S-FITTINGS-2  Deluxe
3/4 Key Valve (3/4″ in/ out) Only Compatible With 1/2″ Flare Fittings
EXTEND Burner Mounting Kit    Additional 4″ Threaded Nipple and Low Profile Coupling to Extend Burner Mounting Kit  optionFRMKextension copy
8″ KEY and SHAFT Extension Key Valve Mounted Thru up to 8″ Materials option-KEY8-12-ShaftCoupling copy
12″ KEY and SHAFT Extension Key Valve Mounted Thru Up to 12″ Materials option-KEY8-12-ShaftCoupling copy

Click Here to See Shaft Extension Diagram

STRAIGHT Mounting Kit/ Gas Supply Fitting Preference of STRAIGHT Female x Flare Fitting Instead of Elbow x Flare PHA12F Instead of PHA12F-90    Any
ELBOW Mounting Kit/ Gas Supply Fitting  Preference of ELBOW Female x Flare Fitting Instead of Straight x Flare PHA12F Instead of PHA12F-90    Any
MALE 1/2 Supply Fitting Replaces Straight Female to MALE Supply Fitting PHA12F-2-PHA12M copy    Any
Female Elbow to MALE Fitting Replaces Elbow Female to MALE Supply Fitting PHA12F90-2-PHA12M copy    Any

 

NEED IT SOONER?

Expedited Shipping – Choose the Service You Need – Click here

If you have questions? Email us at info@easyfirepits.com with a return Phone Number in the email and we can send you an invoice directly (within 24 hours usually) or at the absolute worst, call us at 813-600-5592 (but be advised we are usually busy either shipping or answering questions online so we might get a bit brief. Please read the Q&A Catalog at the top of the page for most answers to easy questions).

FIND THE BURNER YOU NEED

See Burners

Complete Nat Gas/ LP Fire Kits

See Our Kits

OTHER PARTS & ACCESSORIES

See Accessories

Mobile version: Enabled

In the event this site is running slow (traffic) please also see or order from our sister site: www.DIYGasFirePits.com Dismiss