- Q&A/ Price Catalog
- Contact Us
- Product / Kit Finder Page – Start Here
- CUSTOMIZE Your Kit – Click Here – All Options
Loading the content... Loading depends on your connection speed!
Have you Every Wanted to Build Your Own Natural Gas or Propane Fire Table, Fire Pit, Fire Bowl, Tiki Type Torch or Other Fire Feature, but was told you would have to hire it out as no-one sold complete solutions for your needs? Or could even customize such a request? Guess what.. EasyFirePits.com does!
And Below are Options to Customize the KIT you already have in your Cart.
BASIC LP KIT (CK) Kit: Kit Includes/ Options
DELUXE LP KIT (CK+) Kit: Kit Includes/ Options
DELUXE LP KIT (ITCK+) Kit: Kit Includes/ Options
DELUXE Pre-Plumbed GAS (K++) Kit (compatible with NG and LP): Kit Includes/ Options
The propane gas regulator is one of the most important parts of a propane gas system. The purpose of the regulator is to control the flow of gas and lower the pressure from the tank to the appliance(s) in the gas system. The regulator not only acts as a control regarding the flow and distribution of propane but also as a safety barrier between the high pressure of the tank and the end use appliance(s). Most will rightfully argue that the LP Gas regulator is the heart of any propane gas system.
“A regulator is a regulator” is a misleading statement that many consumers believe to be true. The fact is that installing the wrong kind of regulator will generally render a propane gas system inoperable. For example you cannot install a high pressure first stage regulator such as we have below in an already plumbed LP gas system. The regulators below take upwards of 100 pounds of pressure to even open and thus will not regulate or work in a system where there is not “tank pressure” of over this amount in front of it.
Not Sure Which Regulator You Want? Read the Suggestions below this table
|If Deluxe Kit – Choose Regulator in Kit|
|REG5F+||5 PSI Fixed w/ POL/ Fittings|
|REG20F+||20 PSI Fixed w/ POL/ Fittings|
|REG20F+(Elbow)||20 PSI Fixed w/ POL/ Fittings|
|REGO1||20 PSI Fixed (overseas)|
|REGO2||20 PSI Fixed (overseas)|
|REGA+||20 PSI Adjustable w/ POL/ Fittings|
|REGDT3+||3 Way Disposable LP Tank / Fittings|
|REG3001-ACME||Low Pressure w/ Green Acme / Fittings|
|REG3001-POL||Low Pressure w/ POL / Fittings|
|REG2XL+||2 Tank Manual Switchover Regulator & Lines|
|REGDTA+||Disposable LP Tank Adjustable & Fittings|
1). REGA+ :
2). REG5+ :
3). REG20F+ :
1). If you ordered a CK BASIC KIT: If you have a Basic Kit, do not replace the regulator as you will not be able to control it at all unless you do BOTH of the following: 1) Choose to substitute the included REGA+ in your kit to a REG5F+ below (table top applications where 5 ft high flames are NOT WANTED or NEEDED or a REG20F+ below (super duper flames are achievable up to 5 ft high); 2) And YOU ADD a Mini-Needle Valve NV14MF (have to click there and be purchased separately) to install into the end of it; to make it more “ambiance compatible” with consistent lower flames and capable of whatever the regulator will do as well. Will still have to be controlled at the tank side.
NOW AVAILABLE (PRO Upgrades) : If you ordered one of our CK, CK+, ITCK+ or K++ Kits which come with Flexible Thermoplastic/ Rubber Hoses, by clicking the links below you can swap and pay just the difference to Upgrade to STAINLESS Professional Installer Choice Hoses w/ Brass Female Flared Ends.
_PRO Upgrade (CK) Swaps 12′ Thermoplastic Hose to PRO 12′ Stainless Hose w/ 3/8 Brass Female Flared Ends
_PRO Upgrade (CK+) Swaps Both 3′ & 12′ Thermoplastic Hoses to PRO Stainless Hoses w/ 3/8 Brass Female Flared Ends
_PRO Upgrade (ITCK+/K++) Swaps Both 3′ Thermoplastic Hoses to PRO Stainless Hoses w/ 3/8 Brass Female Flared Ends
NEW!! NEED TO CHANGE HOSE SIZES IN A KIT YOU ARE ORDERING?? Now You Can! Once you put your Kit type in your cart, just click on one of these adjustments below, it will open a new tab, ADD THAT OPTION TO YOUR CART, close that tab, and It Will Adjust Your Order: ALSO NOW AVAILABLE – All new CUSTOM Stainless 3/8 ID Hoses with Brass Female Flared Ends for the Professional / Permitted Applications that can be exchanged for our normal rubber hoses.
|HOSE EXCHANGED FROM KIT HOSES OFFERED –|
|Model #:||Old to New Size Needed|
|HE12-2-3||12′ to 3′ Now|
|HE12-2-6||12′ to 6′ Now|
|HE12-2-20||12′ to 20′ Now|
|HE12-2-25||12′ to 25′ Now|
|HE12-2-35||12′ to 35′ Now|
|HE12-2-50||12′ to 50′ Now|
|HE3-2-6||3′ to 6′ Now|
|HE3-2-12||3′ to 12′ Now|
|HE3-2-20||3′ to 20′ Now|
|HE3-2-25||3′ to 25′ Now|
|HE3-2-35||3′ to 35′ Now|
|HE3-2-50||3′ to 50′ Now|
|HE3-2-1SS38||3′ Plastic to 1′ Pro Stainless Hose Now|
|HE3-2-3SS38||3′ Plastic to 3′ Pro Stainless Hose Now|
|HE3-2-12SS38||3′ Plastic to 12′ Pro Stainless Hose Now|
|HE12-2-3SS38||12′ Plastic to 3′ Pro Stainless Hose Now|
|HE12-2-12SS38||12′ Plastic to 12′ Pro Stainless Hose Now|
|OPTIONS||DESCRIPTION of CHANGE||PIC||KIT|
|Chrome Cover Color||Key and Cover Plate color choice||Deluxe|
|Brass Cover Color||Key and Cover Plate color (default)||Deluxe|
|Angled Key Valve
||not Straight Through||Deluxe|
|Straight Key Valve||not Angled – (default – Common)||Deluxe|
|3/4 Key Valve (3/4″ in/ out)||Only Compatible With 1/2″ Flare Fittings|
|EXTEND Burner Mounting Kit||Additional 4″ Threaded Nipple and Low Profile Coupling to Extend Burner Mounting Kit|
|8″ KEY and SHAFT Extension||Key Valve Mounted Thru up to 8″ Materials|
|12″ KEY and SHAFT Extension||Key Valve Mounted Thru Up to 12″ Materials|
|STRAIGHT Mounting Kit/ Gas Supply Fitting||Preference of STRAIGHT Female x Flare Fitting Instead of Elbow x Flare||Any|
|ELBOW Mounting Kit/ Gas Supply Fitting||Preference of ELBOW Female x Flare Fitting Instead of Straight x Flare||Any|
|MALE 1/2 Supply Fitting||Replaces Straight Female to MALE Supply Fitting||Any|
|Female Elbow to MALE Fitting||Replaces Elbow Female to MALE Supply Fitting||Any|
Not Cheap. SUPER HEAVY DUTY! And when you dont want to use a lighter (or can’t) these are perfect. Can be timer controlled, light switch activated, and throttled via a key valve (deluxe kit). If the flames go out, the AWEIS lights it back up.
|AWEIS MODEL #||Inlet / Outlet/ Output BTU’s|
|AWEIS-MINI (LP or NG)||3/8″ / 1/2″ / 125,000 BTUs/ Hr||Mini Capacity – works for most|
|AWEIS-SC (LP or NG)||1/2″ / 1/2″ / 290,000 BTUs/ Hr||Standard Capacity|
|AWEIS HC (LP or NG)||3/4″ / 3/4″ / 512,000 BTUs/ Hr||High Capacity|
|VULCAN TORCH (LP or NG)||1/2″ Inlet / 25,000 BTUs/ Hr||1/2″ Torch Pole Top/ Feature|
If you have questions? Email us at email@example.com with a return Phone Number in the email and we can send you an invoice directly (within 24 hours usually) or at the absolute worst, call us at 813-600-5592 (but be advised we are usually busy either shipping or answering questions online so we might get a bit brief. Please read the Q&A Catalog at the top of the page for most answers to easy questions).
In the event this site is running slow (traffic) please also see or order from our sister site: www.DIYGasFirePits.com Dismiss