Loading the content... Loading depends on your connection speed!

Tampa, FL (813) 600-5592
Shopping Cart - $ 0.00

Showing 1–10 of 258 results

grid
list
New!
option-HE12-2-3: Hose Exchange – Exchange 12′ Hose for 3′ Hose

12 foot long hose is ELIMINATED from your Kit Order and Replaced with a PH3 and a $10.50 credit will be refunded after the order has been placed. 

 

3’ FLEXIBLE HIGH PRESSURE PROPANE/ NAT GAS HOSE; Heavy Duty 350 PSI 3/8″ ID with 3/8″  brass female flare end fittings and ferrules: HE12-2-3

3/8″ ID (internal diameter)

3/8″ Female Flared Brass Ends

 

$ 0.00
option-CHROME: Chrome Color for Key and Cover Plate w/ Deluxe Kits

By Adding this to your cart, you are choosing CHROME as the Painted color for your key and cover plate on your deluxe kit of any kind.

$ 0.00
New!
option-REGDT3: REGDT3 ADJUSTABLE HIGH PRESSURE 3 Way Disposable LP (PROPANE) GAS REGULATOR & FLARE FITTING

Exchange Regulator in Whichever Kit You Purchase with a 3 Way Disposable LP Tank Hi-Pressure 3 WAY /ADJUSTABLE Regulator with 3/8 Flare Fitting Output.

Ideally for smaller burners and table top or outside remote kits where there is no space for a large tanks and you need to partially regulate the gas flow/ fire feature intensity.

option-REGDT3+

$ 0.00
option-PHA12F-90-2-PHA12F: Replaces Angled Female 1/2″ x Flare Fitting to STRAIGHT Female x Flare Fitting

By Adding this to your cart, you are choosing STRAIGHT Fitting instead of the Angled Fitting that attaches to the mounting kit in your ordered kit.

PHA12F-90-2-PHA12F:  When you don’t wish for an elbow fitting which is shown in the diagram of parts you are ordering, this will exchange one of the 90 degree Angled (“elbow”) Female Flare Fittings normally provided with a STRAIGHT Female 1/2″ Flare Fitting. Should you need to replace more, add as many to the cart as you need to replace.

$ 0.00
New!
option-REG-Xchange-20F+: REGA+ to REG20F+: FIXED HIGH PRESSURE 20 PSI LP (PROPANE) GAS 500K BTU REGULATOR W/ POL VALVE

Exchanges the REGA+ (adjustable) 20 PSI regulator to a FIXED 20 PSI regulator. This is a good exchange as long as you have a Deluxe or + Kit (CK+, K++, ITCK+) as the Key Valve will change the intensity of your kit and the Adjustable regulator is somewhat redundant and confuses people; not needed.

Set at 20 psi, this accommodates applications up to 500,000 BTU with 100 psi inlet. Model: REG20F+

$ 0.00
option-ANGLED: Angled Valve for Key Valve Sold w/ Deluxe Kits

By Adding this to your cart, you are choosing ANGLED: Angled Valve for Key Valve Sold w/ Deluxe Kits

$ 0.00
New!
option-REGDTA+: REGDTA+ ADJUSTABLE HIGH PRESSURE ADJUSTABLE Disposable LP (PROPANE) GAS REGULATOR & FLARE FITTING

Exchange Regulator in Whichever Kit You Purchase with a FULLY ADJUSTABLE Disposable LP Tank Hi-Pressure Regulator with 3/8 Flare Fitting Output.

Ideally for smaller burners and table top or outside remote kits where there is no space for a large tanks and you need to partially regulate the gas flow/ fire feature intensity.

option-REGDTA+

$ 0.00
option-PHA12F-2-PHA12F-90: Replaces Straight Female 1/2″ x Flare Fitting to ANGLED (Elbow) Female x Flare Fitting

By Adding this to your cart, you are choosing ANGLED (Elbow) Fitting instead of the Straight Fitting that attaches to the mounting kit in your ordered kit.

PHA12F-2-PHA12F-90:  When you don’t wish for a straight fitting which is shown in the diagram of parts you are ordering, this will exchange one of the straight Female Flare Fittings normally provided with a 90 degree ANGLED (“elbow”) Female 1/2″ Flare Fitting. Should you need to replace more, add as many to the cart as you need to replace.

$ 0.00
New!
option-REG5F+: REG5F+: FIXED HIGH PRESSURE 5 PSI LP (PROPANE) GAS REGULATOR W/ POL VALVE & 3/8 Flare Fitting Installed

Exchange Regulator in Whichever Kit You Purchase with a 5 PSI Hi-Pressure Fixed Regulator with POL Valve and 3/8″ Flare Fitting Output.

This is a good exchange as long as you have a Deluxe or + Kit (CK+, K++, ITCK+) as the Key Valve will change the intensity of your kit and the Adjustable regulator is somewhat redundant and confuses people; not needed.

Set at 5 psi, this will still give a larger than needed flame but accommodates applications ideally where a HUGE flame would not be wanted (table top/ smores table/ wine barrel fire pit/ torch poles) with 100 psi tank inlet. Model: option-REG5F+

$ 0.00
option-ANGLED: Angled Valve for Key Valve Sold w/ Deluxe Kits

By Adding this to your cart, you are choosing ANGLED: Angled Valve for Key Valve Sold w/ Deluxe Kits

$ 0.00
Mobile version: Enabled

In the event this site is running slow (traffic) please also see or order from our sister site: www.DIYGasFirePits.com Dismiss