GAS TORCH and FIRE BOWL / FIRE & WATER KITS

Videos of our Torches in Action!

See how awesome our torches are!

Super WINDY Torch72BCK is AWESOME!

Torch72BCK-2PK

Torch72BCK daytime

B4BCK-2PK Fire Bowls on Pool Wall

B4BCK Torch Bowl in Water Sculpture

 - Day 

 - Night

TORCHES

 Our DIY gas stainless steel torch kits offer a super high quality alternative to the otherwise forever messy fluid filled disposable kind. Will run on MOST gasses and BOTH propane and NG, have the ability to be temporary or portable, hard-piped, and when purchased with bowls are viturally wind proof.

FIRE BOWLS

Whether its on a back patio, in the back yard, mounted on a fence or dock piling or pole, next to a pool, or sitting on a table, our fire bowl components have been a huge success and we hope you will love them too. 

FIRE ON WATER

While everyone knows we sell the fire components for an awesome fire bowl, very few know we now carry the water scuppers to give the illusion of fire on water for pool or outdoor fire water features. 

OUR SEXY GAS TORCHES and THEIR COMPONENTS

  1. B4  Our Torch Burner; Widespread Flames "Outward" from Burner Via 5 Ports 
  2. Bowl5-DIffuser - With 1" Hole Cut in Bottom. Makes Virtually any Use of B4 Burner to be "Wind-Proof"
  3. Bowl11-FireBowl - 11" Stainless Torch Bowl for Our B4BK Kit w/ Main 1" Hole and Drain Hole Drilled in Bottom
  4. B4BK  11" Stainless Fire Bowl Setup w/ Torch Burner Mounted Inside Them
  5. BV12  Ball Valve Usually Mounted Below Bowl to Control Flame On/ Off/ Intensity
  6. PHA12FF  Low Profile Coupling to Attach Bowl/ Burner to Shaft in Absence of BV12 
  7. NIP12-S40  12 inch Long Nipple x 1" Diam; Schedule 40 Stainless Shaft Polished by Default (Un-Polished as OPTION)
  8. NIP24-S40  24 inch Long Nipple x 1" Diam; Schedule 40 Stainless Shaft Polished by Default (Un-Polished as OPTION)  
  9. NIP36-S40  36 inch Long Nipple x 1" Diam; Schedule 40 Stainless Shaft Polished by Default (Un-Polished as OPTION)  
  10. NIP72-S40  72 inch Long Nipple x 1" Diam; Schedule 40 Stainless Shaft Polished by Default (Un-Polished as OPTION)  
  11. MODT  3+1 Cross for IN-LINE TORCH. Gas thru Left, Top and Right, Spike in Bottom 
  12. MODX  2+1 TEE for END/ SINGLE TORCH. Gas thru Top and Side, Spike in Bottom
  13. TF3  TEE to Connect Shaft to Gas for INLINE TORCH When NOT Using SPIKE12
  14. 90F2  90 to Connect Shaft to Gas for END/ SINGLE TORCH When NOT Using SPIKE12  
  15. SPIKE12  12 inch Long Solid Bar Stock Spike to Mount Torches to Ground
  16. PHA12M  1/2 Male x 3/8 Flare Fitting to Connect Gas Hoses to the MODT, MODX, TF3, or 90F2  

MOST COMMON FIRE BOWL COMPONENTS

  1. B4  Our Torch Burner; Widespread Flames "Outward" from Burner Via 5 Ports 
  2. B4BK  11" Stainless Fire Bowl Setup w/ Torch Burner Mounted Inside Them
  3. FR6  6 inch Single Ring Fire Ring Burner 
  4. FR12  12 inch Double Ring Fire Ring Burner
  5. FR18  18 inch Double Ring Fire Ring Burner
  6. See ALL Burners - While ANY Burner Can be Mounted in a Fire Bowl... Bigger is NOT ALWAYS Better
  7. FRMK Fire Ring Mounting Kit. (2) 2.5 inch Threaded Washers on a Fully Threaded 4" Nipple for Easy Installation Thru Umbrella Holes or Other Surfaces 
  8. DK Kit
  9. See ALL Kits - From 1 LB LP Portable Tank to Pre-Plumbed Gasses  
  10. ALL Other Gas Accessories and Fittings We Carry That You May Need

SCUPPER WATER COMPONENTS for FIRE ON WATER


WATER SCUPPERS:  Constructed of heavy duty stainless steel to withstand years of use. They can be powder coated or painted by any of your local shops and this allows us to provide best price as opposed to offering many colors. We have 6 models at this time; in 3 Different sizes; (3) Without front "lips" (flanges) and (3) With front lips (designated with an "L" after the model). 


The Lips are around the front left, right and bottom, are 1 inch wide, are the same polish as the stainless Scuppers and serve as a Drip Guard, for Easy Mounting and A Polished Look. If you look at the photos the scupper actually sits about 1/4 inch thru the Lips so the water doesnt flow backwards into your bowl or creation. 


  • SCUP24R  Stainless Water Scupper/ Waterfall Spillway: 3.25″w (bottom) 5.5″w (top) 4″ long/ deep; 3/4 Female Pipe Water Inlet
  • SCUP24RL  Stainless Water Scupper/ Waterfall Spillway w/ Lip: 3.25″w (bottom) 5.5″w (top) 4″ long/ deep; 3/4 Female Pipe Water Inlet
  • SCUP24S  Stainless Water Scupper/ Waterfall Spillway: 3.5″W (bottom) 4.75″W (top) 4″ long/ deep; 3/4 Female Pipe Water Inlet
  • SCUP24SL  Stainless Water Scupper/ Waterfall Spillway w/ Lip: 3.5″W (bottom) 4.75″W (top) 4″ long/ deep; 3/4 Female Pipe Water Inlet
  • SCUP32B  Stainless Water Scupper/ Waterfall Spillway: 5.75″W (bottom) 6.75″W (top) 4" long/ deep; 3/4 Female Pipe Water Inlet
  • SCUP32BL  Stainless Water Scupper/ Waterfall Spillway w/ Lip: 5.75″W (bottom) 6.75″W (top) 4" long/ deep; 3/4 Female Pipe Water Inlet


SCUPPER HOSES:   Constructed of flexible stainless steel with welded ends and no plastic or "melt-able" materials inside. Made to withstand the heat of a fire pit on top of it (but made for water, not gas).  


We have 4 different models of water hoses at this time; in 2 different sizes. We feature 24 inch and 32 inch lengths; and both are offered in Male x Male 3/4 inch (MxM) or in Male x Female (MxF) 3/4 inch.