THIS PAGE IS ONCE YOU HAVE ADDED ONE OF OUR KITS to the Cart - THIS PAGE IS TO CUSTOMIZE YOUR KIT - NOT TO START YOUR ORDER PROCESS...
ALL of these above are options that can be added to your cart so that we know exactly what you need without the phone calls and back and forth emails. If we see something that doesn't look correct, we'll try to catch it and reach out to work it out, and make sure your order goes out RIGHT the first time, every time.
The propane gas regulator is one of the most important parts of a propane gas system. The purpose of the regulator is to control the flow of gas and lower the pressure from the tank to the appliance(s) in the gas system. The regulator not only acts as a control regarding the flow and distribution of propane but also as a safety barrier between the high pressure of the tank and the end use appliance(s). Most will rightfully argue that the LP Gas regulator is the heart of any propane gas system.
"A regulator is a regulator" is a misleading statement that many consumers believe to be true. The fact is that installing the wrong kind of regulator will generally render a propane gas system inoperable. For example you cannot install a high pressure first stage regulator such as we have below in an already plumbed LP gas system.
The regulators below take upwards of 100 pounds of pressure to even open and thus will not regulate or work in a system where there is not "tank pressure" of over this amount in front of it.
Not Sure Which Regulator Is Right For You? Read the suggestions below this table or leave it as is, it'll be fine
If you did purchase an LP/ Propane Kit, and you wish to substitute from a REG20NV (which is now the standard in all EasyFirePits.com kits), choose the regulator you'd like instead:
Model # Description
DEFINITIONS OF OUR REGULATORS:
1). REGA+ :
2). REG20NV :
3). REG5NV :
4). REG5+ :
5). REG20F+ :
6). REG2XLP :
NOW AVAILABLE (PRO Upgrades) : If you ordered one of our CK, CK+, ITCK+ or K++ Kits which come with Flexible Thermoplastic/ Rubber Hoses, by clicking the links below you can swap and pay just the difference to Upgrade to STAINLESS Professional Installer Choice Hoses w/ Brass Female Flared Ends.
Model #: Old to New Size Needed
OPTIONS DESCRIPTION of CHANGE
Not Cheap. Not something we'll continue to carry so when they are gone they are gone. We recommend a 7" wind proof butane lighter but if you are required to put in something SUPER HEAVY DUTY! And when you dont want to use a lighter (or can't) these are decent. Can be timer controlled, light switch activated, and throttled via a key valve (deluxe kit). If the flames go out, the AWEIS lights it back up.
AWEIS MODEL #Inlet / Outlet/ Output BTU's